Full-View Aluminum Doors

Model EL100

The Elegant EL100 is a stylish modern door that is perfect for anyone. These doors have clean square edges, flawless finishes and a large visible glass area customizable to each home. Whether you are looking to increase the curb appeal of your home or compliment the design of a new home that the architect envisioned, the EL100's edgy contemporary look is the right choice for you.

Full-View Panel Configurations

Choose Your Panel Standard:

Choose Your Panel Standard:

Choose Your Panel Specialty:

Choose Your Panel Specialty:

Full-View Color

Clear or Black:

Full-View Color

Choose from a selection of over 100 different powder coats here...

FULL VIEW ALUMINUM SPECIFICATIONS

Door Frame

  • Material: 1-3/4" thick extruded 6063-T6 non corrosive commercial-grade
  • Sections: Height of section determined by height of door
  • Top rail width - 4-5/8"
  • Bottom rail width - 4-5/8"
  • Combined intermediate rail widths - 4-1/4"
  • Center stile width - 2-7/8" End stile width- 4-5/8"
  • Section Joints: Standard tongue & groove
  • Assembly: Stiles are through bolted to the rails added rigidity and strength
  • Maximum door width: 18ft            
  • Maximum door height: 14ft.

Finish

  • Aluminum is sent through a chemical process that leaves it with an extremely durable anodizing finish

Glass

  • Glass Size Capabilities: Three options of glass thickness available 1/8" / 1/4" / 1/2"
  • Standard Options: Clear Tempered / Frosted Tempered / White Laminate
  •   *specialty glass available upon request to match a style of your home             

              *Please Note: All glass is tempered except for laminated options.

  • Glazing is completed using a butyl tape that adheres the glass to the frame and provides a high quality seal
  • Aluminum retainers are snapped in place with a 1/4" EPDM round foam strip between the glass and aluminum retainer acting as another seal and impact dampener

Track

  • All 2" tracks are 12" or 15" Radius - 14 gauge horizontals with 17 gauge verticals
  • All tracks are mounted with reverse continuous jamb angle
  • Horizontals are reinforced with 13 gauge angle mounted continuous to the length of the horizontal
  • All 3" tracks are 15" Radius - 12 gauge and use is determined by weight of door
  • Options: Low Headroom (0" or 3.5" ), High Lift, Vertical Lift, Follow the Pitch

Hardware

  • All components are galvanized steel and consist of 14 gauge hinges, 12 gauge top & bottom fixtures
  • 2" nylon 10 ball bearing rollers with long-stem for top & bottom fixtures and short-stem for hinges
  • Inside lock included
  •  *Please Note: 11 gauge components and 3" steel 10 ball bearing rollers will be used when specified.

Counterbalance

  • Springs are oil tempered and calibrated per door weight, size and track requirements
  • Standard springs are 10,000 cycle
  • 25k, 50k, 100k cycle springs are available with an additional cost.
  • 12 guage bearing & spring plates
  • 16 gauge torsion tube is standard, 14 gauge, 11 gauge and solid shafts are available and used when specified

Struts

  • (2) 22GA 2-1/4" galvanized steel struts come with every door, 3" when specified

Weather Seal

  • 4" bulb type bottom weather-seal is standard, 6" available at additional cost

Warranty

Limited 2 year warranty against cracking, chipping and or fading of the anodized or powder coat finish; limited 1 year warranty on hardware and components.

Manuals and Specifications

EL100 Warranty
EL100 Warranty
Full View Panel Standard
Full View Panel Standard
Full View Panel Specialty
Full View Panel Specialty
Full View Aluminum Specs
Full View Aluminum Specs
Drylac Color Catalogue
Drylac Color Catalogue