Semi-Custom Garage Doors

SEMI-CUSTOM GARAGE DOORS

Our semi-custom wood doors are built with quality in mind and are a beautiful cost conservative option. They are constructed like a traditional rail & stile door with 10 standard designs available in paint grade or stain grade. Each design can be slightly modified to your desired specifications.

Elegant Guarantee

At Elegant we provide quality craftsmanship that will last for years to come.
DOOR STYLES

Choose Your Door:

Choose Your Door:
Window & Panel Styles
  • 1/8” Clear Double Strength Billet Glass 
  • Many other types of glass are available including insulated options
  • 2” Wide Mullions
  • Faux Divide is standard
  • True Divide (Thru and Thru) available

SEMI CUSTOM SPECIFICATIONS

2 Layer Door

Paint Grade (primed white)

  • Back (layer 1): ¼” Luan
  • Frame (layer 2): 1-3/8” FJ (Finger Joint) Hem Fir Deep Plowed
  • Insulation: ½” Polystyrene is optional and considered an upgrade.
  • Panels (Option 1): 3/8” Baltic Birch recessed panels available with or without V-Grooves.
  • Panels (Option 2): ½” Extira raised panels (Considered upgrade, additional charges may apply)
  • Stiles: Double center stiles with V-Groove


Stain Grade (unfinished)

  • Back (layer 1): ¼” Luan
  • Frame (layer 2): 1-3/8” Clear Western Hemlock Deep Plowed
  • Insulation: ½” Polystyrene is optional and considered an upgrade.
  • Panels (Option 1): 3/8” Aquatek Marine Ply recessed panels available with or without V-Grooves.
  • Panels (Option 2): 5/8” Hemlock raised panels (Considered upgrade, additional charges may apply)
  • Stiles: Double center stiles with V-Groove

Finish

  • Paint Grade: Comes primed white with 1 coat of exterior grade water based primer
  • Stain Grade: Comes unfinished and requires sanding prior to finishing. (Finishing is required to be completed within 72 hours of installation)  

Track   

  • All 2" tracks are 12" or 15" Radius - 14 gauge horizontals with 17 gauge verticals
  • All tracks are mounted with reverse continuous jamb angle
  • Horizontals are reinforced with 13 gauge angle mounted continuous to the length of the horizontal
  • All 3" tracks are 15" Radius - 12 gauge and use is determined by weight of door
  • Options: Low Headroom (0" or 3.5" ), High Lift, Vertical Lift, Follow the Pitch    

Hardware

  • All components are galvanized steel and consist of 11 gauge hinges, 12 gauge top & bottom fixtures
  • 2" nylon 10 ball bearing rollers with long-stem for top & bottom fixtures and short-stem for hinges
  • Inside lock included.
  •   *Please Note: 3" steel 10 ball bearing rollers will be used when specified.

Counterbalance

  • Springs are oil tempered and calibrated per door weight, size and track requirements
  • Standard springs are 10,000 cycle
  • 25k, 50k, 100k cycle springs are available with an additional cost
  • 12 guage bearing & spring plates
  • 16 gauge torsion tube is standard, 14 gauge, 11 gauge and solid shafts are available and used when specified

Struts

  •  22GA 2-1/4" galvanized steel struts with every door, 3" when specified.
  • Quantity is determined by number of sections

Weather Seal

  • 1-3/8" EPDM bottom seal and nailed in using galvanized nails

Warranty

Limited 1 year warranty against defect in workmanship or material; limited 1 year warranty on hardware and components.

Miscellaneous

  • Putty: All doors are assembled with galvanized staples and filled in with putty except Cedar and Marine Ply
  • Standard Texture is smooth
  • Hand Hewn, Re Sawn, and Wire Brushing are available for additional cost
  • Perimeter Weather Strip (Stop Mold): 11/16”x2-1/4”    
  •   *Available in all species of wood

Manuals and Specifications

Semi Custom Door Styles
Semi Custom Door Styles
Semi Custom Specs
Semi Custom Specs
Semi Custom 2 Layer Door Specs
Semi Custom 2 Layer Door Specs